![background image](http://html1.mh-extra.com/html/echo/echolink-917/echolink-917_manual_3947942007.webp)
11. When fully charged , ensure the volume
is at zero, put on the headset (7) or neckloop (9)
and plug into the phone socket on the receiver.
If you are using the neckloop, set your hearing
aids to the “T” setting. Adjust the volume to a
comfortable listening level using the yellow o
n/off volume wheel.
12. Tone can be adjusted via the three
position switch on the side of the receiver.
13. When you are finished using the receiver
switch it off and place it back into the charging base.
14. When the receiver is in use and the battery level is low, the ON/ OFF
LED will flash RED. Then after a few minutes the receiver will automati
-
cally turn off to protect the batteries. The receiver must be recharged if
this
occurs.
NOTE: if Audio and digital audio are in use together, the default signal
is digital.
6
Содержание EchoLink 917
Страница 8: ...Fig 3 Fig 4 7 Fig 2...