7
1)
Press the “P” button for 5 seconds to access the controller features. The controller will beep twice.
2)
Press and release the “P“ button once to select the clock (hour digits will flash).
3)
Press the “TRUNK“ button to scroll up or the “START“ button to scroll down.
4)
Press the “P” button to switch to the minute digits.
5)
Press the “TRUNK“ button to scroll up or the “START“ button to scroll down.
6)
Wait 10 seconds or press the “P” button for 5 sec. to exit programming. The controller beeps once.
SETTING THE CLOCK
The controller has 5 melodies to choose from for remote start “ON” and “OFF” confirmation.
1)
Press the “P” button for 5 seconds to access the controller features. The controller will beep twice.
2)
Press and release the “P“ button 3 times. The clock will change to “01 STRT” (start melody #1”).
3)
Press the “TRUNK“ button or the “START“ button to scroll through the melodies.
4)
Press the “P” button to switch to the remote start OFF melody selection.
5)
Press the TRUNK button or the “START“ button to scroll through the melodies.
6)
Wait 10 seconds or press the “P” button for 5 sec. to exit programming. The controller beeps once.
CHANGING REMOTE START MELODIES
Controller Options (cont’d)
You can lock the buttons on the controller to prevent accidental button presses. To lock the
buttons, press “
P
” and “START“ simultaneously for 1 second. Repeat this to unlock the buttons.
BUTTON LOCK
This feature turns off the screen after 15 seconds of no activity to preserve battery life.
1)
Press the “P” button for 5 seconds to access the controller features. The controller will beep twice.
2)
Press the “P“ button momentarily 5 times to select the Power Save feature (clock reads “PS ON”).
3)
Press the “TRUNK“ button to change between “PS ON” or “PS OFF”.
4)
Wait 10 seconds or press the “P” button for 5 sec. to exit programming. The controller beeps once.
POWER SAVE MODE
