ASSEMBLY
DSRM-2600/U
18
X7508163900
© 10/21 ECHO Incorporated
1.
Align notch in edge of shield
and hole in line head plate with
notch in edge of gear housing
and insert head locking tool
(G).
2.
Thread line head (J) onto PTO
shaft by turning it
counterclockwise until head is
tight against line head plate.
3.
Remove locking tool (G).
Semi-automatic nylon line heads must be used only with debris
shield with cut-off knife. Using nylon line heads with debris shield
without cutoff knife can result in trimmer damage, caused by
operation with excessive line length.
Note: Your nylon line head may appear different than nylon line
head shown.
To Advance Trimmer Line
Note: To advance trimmer line, tap trimmer head against the
ground while the head is turning at normal operating speed.
Battery Charging
Note: See separate operator’s manuals packaged with battery and
charger.
• Use only with ECHO eFORCE™ 56V battery series batteries and
chargers.
• Keep charger and battery away from damp conditions and all liquids.
• Do not operate the charger on an easily combustible surface (e.g. paper,
textiles) or in an environment with a high risk of fire.
J
G