Echo CWT-7410 Скачать руководство пользователя страница 4

Страница: 4 / 20

Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application

Carefully read the operator's

manual.

Wear eyes, ears, nose,

mouth and head protection

Safety / Alert

Parking position

Do not lift the cut-off saw by

the front handle

Locked

Reverse mounting of cutter

arm prohibited

Unlocked and Free to move

SYMBOL FORM

WARNING

The safety alert symbol accompanied by

the word “WARNING” calls attention to an

act or condition which CAN lead to serious

personal injury or death if not avoided.

CAUTION

The safety alert symbol accompanied by

the word “CAUTION” calls attention to an

act or condition which may lead to minor or

moderate personal injury if not avoided.

NOTICE

This enclosed message provides tips for use,

care and maintenance of the unit.

IMPORTANT

The enclosed message provides information

necessary for the protection of the unit.

DANGER

The safety alert symbol accompanied by

the word “DANGER” calls attention to an

act or condition which WILL lead to serious

personal injury or death if not avoided.

SYMBOLS AND SIGNS

CIRCLE AND SLASH SYMBOL

This symbol means the specific action

shown is prohibited. Ignoring these

prohibitions can result in serious or

fatal injury.

DECALS

Locate this safety decal on your unit. The complete

unit illustration found in the “NOMENCLATURE OF

PARTS” section will help you locate them.

Make sure the decal is legible and that you

understand and follow the instructions on it. If a

decal cannot be read, a new one can be ordered

from your ECHO dealer.

Part Number X505-011460

Содержание CWT-7410




















Результаты поиска

Содержание CWT-7410

Отзывы:

Похожие инструкции для CWT-7410

Бренды по названию

Популярные бренды

Echo CWT-7410, Руководство оператора

Результаты поиска

Содержание CWT-7410

Отзывы:

Похожие инструкции для CWT-7410

Бренды по названию

Популярные бренды