![background image](http://html1.mh-extra.com/html/echo/cs-2511tn/cs-2511tn_operators-manual_3948891039.webp)
CS-2511TN
OPERATION
X7503334400
39
© 11/22 ECHO Incorporated
Sap from palm trees may corrode metal parts unless proper saw
maintenance is performed. Make sure to clean metal parts from palm
sap immediately after use.
• Remove sprocket guard. Clean wood chips and sawdust from guard and
engine crankcase.
• Never use metal tools for cleaning which can scratch the metal paint and
allow corrosion to develop.
• Clean sap accumulation from metal parts with cloth and warm water with
soap.
• Rinse with clean water and dry metal surfaces.
• Apply a light coating of engine or bar and chain oil to metal parts after
they are cleaned.
• Install and properly tension guide bar and chain. Run engine for one
minute alternating engine speed between full throttle for five seconds and
idle for five seconds to coat metal parts with additional protective chain
oil.
◆
Do not run a chainsaw not under cutting load at wide open
throttle longer than five seconds or engine damage can
occur.
◆
Keep chain properly tensioned during operation to prevent
the chain from jumping out of the guide bar rail slot and
damaging metal engine parts.
Felling the Tree
A falling tree can seriously damage anything it may hit - a car, a
house, a fence, a power line, or another tree. There are ways to
make a tree fall where you want it, so first decide where that is!
Содержание CS-2511TN
Страница 62: ...PRODUCT REGISTRATION CS 2511TN 62 X7503334400 11 22 ECHO Incorporated ECHO Incorporated...
Страница 63: ...CS 2511TN NOTES X7503334400 63 11 22 ECHO Incorporated NOTES...
Страница 64: ...ECHO INCORPORATED 400 Oakwood Road Lake Zurich IL 60047 www echo usa com C89215001001 C89215999999...