![background image](http://html.mh-extra.com/html/echo/cs-2511p/cs-2511p_operators-manual_531781022.webp)
DESCRIPTION
CS-2511P
22
X7503333700
© 11/2020 ECHO Incorporated
Preparation For Use
Make sure engine is stopped before performing any of the
procedures that follow. Saw chain is sharp! Always wear gloves
when handling assembly. Failure to follow instructions can
cause serious personal injury.
Note: The machine may be delivered with guide bar, and saw chain
not installed. Install guide bar, saw chain, and optional Kick
Guard
TM
as follows.
Instructions to Install Optional Kick Guard
TM
to Bar
Tools Needed: Two 11 mm (7/16 in.)
Wrenches
.
1.
Install bolt (A) in
rear
hole (B) of
optional Kick Guard
TM
and
through front hole (C) in guide
bar.
2.
IMPORTANT:
Dimple (D) in
optional Kick Guard
TM
must
engage recess (E) in guide bar.
3.
Securely tighten nut (F) and
bolt (A).
Guide Bar and Saw Chain
Installation / Removal
1.
Use T-Wrench to open air
cleaner cover latch. Disconnect
spark plug lead.
2.
Unlock chain brake (A).
3.
Remove sprocket guard nut (B)
and remove sprocket guard
cover (C).
A
D
B
E
C
F
Optional
Kick Guard
TM
A
B
C