manualshive.com logo in svg
background image

32

BOW SAW WARNING

 

WARNING!

  ECHO does not recommend the use of bow saws. If you choose 

to attach a bow guide to an ECHO chain saw, and thus create a bow saw, you 

do so at your own risk. A bow guide attachment increases the risk of severe 

kickback and serious injury.  Do not use a bow guide unless you have experience 

or specialized training. Do not remove guard(s) or spur(s) on the bow guide 

provided by the manufacturer. Do not rely on a chain brake to prevent or reduce 

an injury associated with the severity of a kickback from a bow saw.

Proper use of the bow guide’s spurs can prevent bow saw kickback. Do not rely on low kickback chain to reduce kickback 

when used with a bow saw, even though it may have qualified under ANSI B175. Low kickback chain is not effective in 

reducing the likelihood of a bow saw kick back.

ELECTRIC CHAIN SAW SAFETY

SAFETY PRECAUTIONS

 - There are added safety precautions that must be 

taken regarding electric chain saws:

 DANGER! T

o reduce the risk of electric shock or electrocution, 

never 

use 

an electric chain saw, or any other electrical device in rain, or in wet locations.  

Serious injury can occur due to electric shock or death by electrocution.

  

 WARNING!  Do not use damaged extension cords with cuts. Inspect 

the electric cords before each use and replace them if damaged.  Cord 

insulation  must  be  intact  with  no  cracks  or  deterioration.  Use  only 

polarized  extension  cords  marked  as  suitable  for  outdoor  appliances 

and in conjunction with qualified, tested Ground Fault Circuit Interrupter 

(GFCI) protected circuits. Do not use multiple cords. Plug connectors 

must be undamaged. 

 WARNING! Always use qualified GFCI protected circuits when using 

electrical equipment outdoors. A ground fault interrupter in the power 

supply line will help prevent fatal shocks.

 WARNING! Avoid unintentional starting of the chain saw by making 

sure the switch is off before plugging in the unit. Never tie the switch 

down in any fashion so as to lock the switch in position.

 

 WARNING!  Never leave a plugged in unit unattended. It is always 

possible for a child or inexperienced user to wander up to the unit for 

experimentation or play.

  WARNING!  Do  not  abuse  the  electric  cord.  Never  carry  the  chain 

saw by the cord. Do not yank the cord when disconnecting the unit or 

extension cord from power receptacles.

      

 WARNING!  Keep electric cords away from heat, sharp edges, or any 

area that can increase the possibility of cutting the cord, and exposing 

operator or others to shock or electrocution.

AVOID USING BOWSAWS

NEVER CUT IN WET CONDITIONS

USE TESTED GFCI CIRCUITS

 AVOID USING 

  DAMAGED CORD

 DON’T CARRY BY CORD

Содержание CHAIN SAW





































Отзывы: