Connecting to the Audio Interface
Connecting to the Audio Interface
The AudioFire8 and AudioFire12 audio interfaces contain a wide variety of
connections that allow great flexibility in operation. For optimal performance, it is
critical to use the appropriate cabling and connectors.
Analog Inputs and Outputs – AudioFire8
AudioFire8’s front panel has two universal inputs (#s 1 – 2) with meters and trim
knobs, a phantom power switch and light (+48v), and a power button with an
amber power indicator light (not shown below). There is also a ¼” stereo
headphone output jack, with a corresponding volume knob, which monitors analog
outputs 1 and 2.
AudioFire8 has six analog line inputs (#s 3 – 8) and eight analog line outputs on
the rear panel. These analog inputs (#s 3 – 8) operate with an input impedance of
10Kohms. The input and output connections can be used with balanced or
unbalanced cables via the ¼” connectors. By default, the inputs and outputs are set
to receive or send a +4dBu signal.
12
Connecting to the Audio Interface
Содержание AUDIOFIRE 8
Страница 1: ...AUDIOFIRE 8 AUDIOFIRE 12 Owner s Manual Version 1 1 for Macintosh...
Страница 7: ...INDEX 53...