PAS A
RTICULATING
H
EDGE
C
LIPPER
A
TTACHMENT
O
PERATOR
'
S
M
ANUAL
11
1.
Brush loose debris from blade and coat both sides of blade with
the 50-50 cleaning mixture.
2.
Allow cleaning mixture to soften the remaining gummy residue then
wipe it from the blade.
3.
Apply clean oil to the entire length of the blade. Be certain the
blade bolts are lubricated.
4.
Wipe excess oil from the blade before putting the unit back in
service.
Gear Housing
Level 1.
Tools required:
Grease Gun, Rag.
Parts required:
ECHO
®
LUBE
TM
14 oz. Cartridge P/N 91015 Grease or
Lithium-based Grease.
1.
Clean dirt from grease fittings (A).
2.
Carefully pump grease in each fitting. DO NOT force grease.
Too much pressure will force grease past seals and cause damage.
Apply 1-2 pumps of grease every 15-25 hours of operation.
A
A
