3
1
4. a. Back Pack Blowers - Connect adapter (4) to second
blower unit pipe.
b. Hand Held Blowers - Connect adapter (4) to first
blower pipe.
5. Connect kit pipes to adapter with clamp (1).
NOTE
Use only enough pipes to comfortably reach the inside of
the gutter.
1
4
OPERATING INSTRUCTIONS
1. For best results, angle pipes approximately 10 degrees from
the side of the rain gutter. The adjustable nozzle should be
angled 30 to 45 degrees in the direction you will be clean-
ing.
2. Start the unit and slide the nozzle along the lip of the gut-
ter, lifting the outlet nozzle up and over the gutter support
brackets. Keep the long pipes angled slightly ahead of you
in the direction you are cleaning.
NOTE
When the power blower is started, the air exiting from the
nozzle will cause the long extension to sway slightly. Hold
the unit firmly for effective cleaning.
Individual conditions will vary when using this attachment.
Some practice and experimentation will be necessary to find
the most effective position for the type of house and gutter
design.
2
1
2
3
30 - 45
o
4
TO
BLOWER
PIPE
