1
2620 S
erieS
F
lex
D
rive
S
haFt
K
it
i
nStallation
i
nStructionS
P/N
90206
For
SrM-2620
P/n 90207
For
SrM-2620t
Kit 90206 and 90207includes:
Part Number Description
Qty
A556001760 Clutch Drum
1
61092255931 Main Pipe Fixture
1
90070100012 Drum Retaining Ring
1
C506000470 Flexible Drive Cable
1
P021051520
Gear Case Assy (90206 1.62 Sq Drive) 1
P021051360
Gear Case Assy (90207 2.07 Sq Drive) 1
DISASSEMBLY
1. Remove Spark Plug, and Air Filter Cover. Remove bottom and side
Muffler Cover mount screws using a T27 torx driver. Remove Muffler
Cover by rotating up to disengage from Engine Cover hinge.
2. Remove Clip holding Throttle Cable on carburetor Swivel. Rotate
carburetor rotor to disengage Throttle Cable end from Swivel.
Note:
Clip must be reused, do not deform original shape.
Use 10mm open end wrench to loosen Flange Nut holding Throttle
Cable and remove cable from carburetor bracket.
3. Remove (2) Engine Cover T27 screws: rear center, and top left with
torx driver. Remove Engine Cover.
4. Loosen T27 Main Pipe Holder screw and remove Cable Clip.
5. Disconnect two (2) Ignition Leads between the Control Handle and
engine, then slide engine off Main Pipe assembly.
Tools Required:
•
External Snap Ring Pliers w/.053 Tip
• Cupped Pliers
•
Flat-Blade Screwdriver
• 10mm Wrench
•
T27 Torx Driver
• Soft Mallet
• W-D 40
• Press
• Rubbing Alcohol
X7672340001
12/16
Remove
Remove
Clip
Nut
Flange
Nut
