background image

H

EDGE

 C

LIPPER

O

PERATOR

'

S

 M

ANUAL

9

S

PECIFICATIONS

MODEL ------------------------------------------ HC-151

Length -------------------------------------------- 1,040 mm  (41.0 in.)

Width --------------------------------------------- 240 mm (9.45 in.)

Height -------------------------------------------- 200 mm (7.87 in.)

Weight, dry -------------------------------------- 4.98 kg (11.0 lb.)

Type of Engine ---------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine

Displacement ------------------------------------ 21.2 cc (1.29 cu.in.)

Bore ----------------------------------------------- 32.2 mm (1.27 in.)

Stroke --------------------------------------------- 26.0 mm (1.02 in.)

Exhaust System --------------------------------- Spark Arrestor Muffler w/catalyst

Carburetor --------------------------------------- Zama w/purge

Ignition System --------------------------------- Flywheel Magneto, Capacitor discharge ignition

Spark Plug --------------------------------------- BPM-8Y (Gap 0.65 mm (0.026 in.)

Fuel ----------------------------------------------- Mixed Fuel - gasoline and oil

Fuel/Oil Ratio ------------------------------------ 50:1 two-stroke air cooled engine oil

Gasoline ------------------------------------------ 89 Octane unleaded. DO NOT use fuel containing methyl alcohol, more than

10% ethyl alcohol or 15% MTBE.

Oil ------------------------------------------------- Power Blend 

TM

 Premium Universal 2-Stroke Oil

Fuel Tank Capacity ----------------------------- 0.5 lit. (16.9 fl. oz)

Starter System ----------------------------------- Automatic Recoil Starter

Clutch -------------------------------------------- Centrifugal Type

Gear Case Ratio --------------------------------- 5.88:1

Cutter --------------------------------------------- Double Reciprocating Blade, Double Edge

   Length ----------------------------------------- 490 mm  (19.3 in.)

   Pitch -------------------------------------------- 35 mm  (1.38 in.)

   Height ------------------------------------------ 21 mm  (0.83 in.)

Idle Speed (RPM) ------------------------------- 2,400 - 3,200

Wide Open Throttle (RPM) -------------------- 10,000 - 11,000

Содержание 06999999

























Отзывы: