background image

12

WARNING  

  DANGER

The blades should not move at idle. If blades move, readjust
carburetor according to “Carburetor Adjustment” instructions in
this manual or see your ECHO Dealer, otherwise serious personal
injury may result.

6. Throttle Trigger

After engine warm-up, grip the handle to depress the throttle trigger
lockout, and gradually depress throttle trigger to increase engine
RPM to operating speed.

4. Recoil Starter

Lay the unit on a flat, clear area. Grip the front handle securely with
one hand, and pull the recoil starter handle (D) until engine fires (or
5 pulls maximum).

5. Choke

After engine fires or 5 pulls, move choke (B) to the RUN (

)

(OPEN) position. Restart engine if necessary and allow unit to warm
up at idle for several minutes.

NOTE
If engine does not start with choke in “Run” position after 5 pulls,
repeat instructions 2 - 5.

O

PERATION

NOTE
The blade cover is used for transportation and storage. Remove
blade cover before using the unit.

STARTING

 

COLD

 

ENGINE

A

D

B

4

5

B

C

1. Stop Switch

Move stop switch (A) away from the STOP position.

2. Choke

Move choke (B) to the Cold Start (

 ) (CLOSED) position.

3. Primer

Pump primer bulb (C) until fuel is visible and flows freely in the clear
fuel tank return line. Pump bulb an additional 4 or 5 times.

Содержание 06999999

























Отзывы: