background image

21

Maintenance and care

Maintenance and care

Servicing guidelines

Maintenance and care

Cleaning air filter

Tools required:25-50 mm (1-2 in.) Cleaning brush
Parts required:Air filter

1.  Close choke (

). This prevents dirt from entering the car-

burettor throat when the air filter is removed.

2.  Remove air filter cover. Brush dirt from inside cover.
3.  Remove air filter and lightly brush debris from filter. Replace 

filter if it is damaged, fuel soaked, very dirty, or the rubber 
sealing edges are deformed.

4.  If filter can be reused, be certain it:

Fits tightly in the air filter cavity.

Is installed with the original side out.

5.  Install air filter cover.

Area

Maintenance

Page

Before use

Monthly

Air filter

Inspect / Clean / Replace

21

Fuel filter

Inspect / Replace

22

Spark plug

Inspect / Clean / Adjust / Replace

26

Carburettor

Inspect

23

Cooling system

Inspect / Clean

24

Exhaust system

Inspect / Tighten / Clean

25

Starter

Inspect

-

Fuel system

Inspect

-

Screws, bolts and nuts

Inspect / Tighten / Replace

-

IMPORTANT

Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.

If you have any questions or problems, please contact your ECHO DEALER.

1. Air filter

2. Air filter cover

Содержание 0232291

































Отзывы: