Echo Audio Echo 2, Руководство пользователя

Страница: 15 / 20

Echo 2 User Guide
15
Flashing LED
– “Studio” mode. IN 1 is monitored through OUTL (panned hard
left) and IN 2 is monitored through OUTR (panned hard right).
Headphone Routing
In normal operation, the headphones have their own D/A converter and are playback
channels 3 and 4. There are times, such as listening to the Windows Media Player,
when it is useful to have the headphones mirror the main outputs, and playback
channels 1 and 2. To put the headphone output into this mode, preass and hold the
headphone button for two seconds until the LED starts to flashy. To return to normal
operation, press and hold the headphone button for two seconds again.
Steady LED
– Headphones are output channels 3 and 4.
Flashing LED
– Headphones are output channels 1and 2.
Saving Settings
Settings are automatically saved. The Echo 2 will wait 30 seconds after your last
change and then save your settings. The panel will flash briefly during the save
operation.
When you power up the Echo 2, your settings will be restored. However, phantom
power will always be turned off. If an input is not connected, that input will be reset to
LINE mode with 0 dB of gain.