Echelon SPINCO PODIUM, Руководство пользователя

Страница: 11 / 26

11
11
TROUBLE CONNECTING?
NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION.
ASSEMBL
Y
Remove the four preinstalled screws
and set to the side.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Unscrew the three small
preinstalled screws from the cover
on the back of the tablet and set
aside. Flip the tablet back over.
Peel the backing off of the included
wire clip.
Place wire clip, as shown above, and
press and hold wire clip down for
ten seconds for proper adhesion.
Plug in power cord to DC input and
place excess cord in wire clip.
11
11
TROUBLE CONNECTING?
NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION.
ASSEMBL
Y
Remove the four preinstalled screws
and set to the side.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Unscrew the three small
preinstalled screws from the cover
on the back of the tablet and set
aside. Flip the tablet back over.
Peel the backing off of the included
wire clip.
Place wire clip, as shown above, and
press and hold wire clip down for
ten seconds for proper adhesion.
Plug in power cord to DC input and
place excess cord in wire clip.
11
11
TROUBLE CONNECTING?
NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION.
ASSEMBL
Y
Remove the four preinstalled screws
and set to the side.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Unscrew the three small
preinstalled screws from the cover
on the back of the tablet and set
aside. Flip the tablet back over.
Peel the backing off of the included
wire clip.
Place wire clip, as shown above, and
press and hold wire clip down for
ten seconds for proper adhesion.
Plug in power cord to DC input and
place excess cord in wire clip.
11
11
TROUBLE CONNECTING?
NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION.
ASSEMBL
Y
Remove the four preinstalled screws
and set to the side.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Unscrew the three small
preinstalled screws from the cover
on the back of the tablet and set
aside. Flip the tablet back over.
Peel the backing off of the included
wire clip.
Place wire clip, as shown above, and
press and hold wire clip down for
ten seconds for proper adhesion.
Plug in power cord to DC input and
place excess cord in wire clip.
11
11
TROUBLE CONNECTING?
NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION.
ASSEMBL
Y
Remove the four preinstalled screws
and set to the side.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Unscrew the three small
preinstalled screws from the cover
on the back of the tablet and set
aside. Flip the tablet back over.
Peel the backing off of the included
wire clip.
Place wire clip, as shown above, and
press and hold wire clip down for
ten seconds for proper adhesion.
Plug in power cord to DC input and
place excess cord in wire clip.
11
11
TROUBLE CONNECTING?
NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION.
ASSEMBL
Y
Remove the four preinstalled screws
and set to the side.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Unscrew the three small
preinstalled screws from the cover
on the back of the tablet and set
aside. Flip the tablet back over.
Peel the backing off of the included
wire clip.
Place wire clip, as shown above, and
press and hold wire clip down for
ten seconds for proper adhesion.
Plug in power cord to DC input and
place excess cord in wire clip.
Remove the four preinstalled screws
and set to the side.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Unscrew the three small
preinstalled screws from the cover
on the back of the tablet and set
aside. Flip the tablet back over.
Plug in power cord to DC input and
place excess cord in wire clip.
Place wire clip, as shown above, and
press and hold wire clip down for
ten seconds for proper adhesion.
Peel the backing off of the included
wire clip.
ASSEMBL
Y
11