2
Introduction
This machine is intended for use by residential
homeowners. It is primarily designed to remove
snow from paved surfaces, such as driveways,
sidewalks, and other surfaces for traffic on
residential or commercial properties. It is not
designed to remove materials other than snow,
nor is it designed to clear off gravel surfaces.
Read this manual carefully to learn how to operate
and maintain your product properly, and to avoid
injury and product damage. You are responsible
for operating the product properly and safely.
This is the safety alert symbol. It alerts you to
potential personal injury hazards. Follow all safety
messages that follow this symbol to avoid possible
injury or death.
This manual uses two words to highlight
information: ―
Important
‖ calls attention to special
mechanical information and ―
Note
‖ emphasizes
general information worthy of special attention.
Safety
This machine meets or exceeds the ANSI B71.3
Specifications
of
the
American
National
Standards Institute in effect at the time of
production.
Read and understand the contents of this
manual before you start the engine.
This machine is capable of throwing objects
and of injuring hands and feet. Failure to
observe the following safety instructions could
result in serious injury.
Improperly using or maintaining this machine
could result in injury or death. To reduce this
potential, comply with the following safety
instructions.
Training
•
Read, understand, and follow all instructions
on the machine and in the manual(s) before
operating this machine.
•
Thoroughly familiarize yourself with the controls
and proper use of the machine. Know how to stop
the machine and disengage the controls quickly.
•
Never allow children to operate the machine.
Never allow adults to operate the machine
without proper instruction.
•
Keep the area of operation clear of all persons,
particularly small children.
•
Exercise caution to avoid slipping or falling.
Product Overview
1. Control bar
5. Control handle
2. Recoil start handle
6. Discharge chute
3. Spring cover
7. Chute deflector
4. Fuel tank cap
8. Rotor Blade
1. Spark plug
5. Primer
2. Oil fill cap
6. Ignition key
3. Oil drain plug
7. Electric start button
4. Choke leveler
8. Electric plug-in
