ECG TV LED 621, Инструкция по эксплуатации

Страница: 50 / 60

EN
50
Start
Press ENTER / B to start the channel scan process.
Analog Manual Scan
Press V/v to select Analog Manual Scan and then press
ENTER /B to enter the sub-menu.
Analog Scan
Press b/B to select the Analog Scan.
Color System
Press b/B to select the color system: Auto, PAL or SECAM.
Sound System
Press b/B to select the Sound System: Auto, DK, BG, I or L.
Modulation
Press b/B to select the modulation: Auto, 16QAM, 32QAM,
64QAM, 128QAM, 256QAM.
AFC
Auto fi ne tune.
Press
b/B to select On or Off .
Start
Press ENTER / B to start the channel scan process.
Channel Edit
Press V/v to select Channel Edit and then press ENTER /B to
enter the sub-menu.
Three color buttons on the remote controller make organizing
channels easier.
Use
V/v to fi rst highlight the channel you wish to delete, move
or skip. Next:
•
Press the red button to delete the channel.
• Press the green button to skip the selected channel.
(When surfi ng through channels via CH+/-, these channels will
automatically be skipped).
• Press the blue button to mark a channel to be moved. Use
the buttons to move the channel to the desired position.
Common Interface
Press
V/v
to select Common Interface and then press ENTER to enter the sub-menu.
This option is only available in DTV mode with an inserted CI card.
Signal information
Use V/v to select Signal Information and then press ENTER to display signal information. Available only in
DTV mode.
Lock System menu
Press MENU to display the main menu.
Select LOCK SYSTEM from the main menu via b/B and press ENTER /V to enter the menu.
Analog Manual Scan
Analog Scan
Color System Auto
Sound System Auto
AFC Off
Start
Move Setup Return Exit
Analog Manual Scan
Analog Scan 44.25 MHz
Color System Auto
Sound System Auto
AFC Off
Stop
Scan 48.25 MHz...
Move Select Return Exit
Channel Edit
800 ONE HD
801 TEN Digital
802 ONE HD
803 ONE Digital
Move Select Return Exit
Delete Skip Move