ECG TV 3030 Heat R, Инструкция по эксплуатации

Страница: 7 / 84

English English
7
USING THE APPLIANCE
This hot air ventilator uses hot air technology with temperature regulation. You can set the required output
level by turning the function switch:
= off
= fan only
I = low 1000 W
II = higher output 2000 W
The red indicator light indicates the hot air ventilator has been turned on.
1. Turn the thermostat control clockwise to maximum.
2. When the required temperature in the room is reached, turn the thermostat control counterclockwise
until you hear light click indicating that the thermostat is off. The hot air ventilator and indicator light is
turned off.
3. The device now maintains the set room temperature. As soon as the room temperature drops, the hot
air ventilator will automatically switch on and after reaching the desired room temperature, will again
automatically switch off.
Safety thermal fuse
1. The device is also equipped with a safety thermal fuse, which automatically switches the device off if it
experiences overheating.
2. In the event of overheating, switch the fan off using the function switch, unplug it and let cool at least
10 minutes. Afterwards, you may connect the device and turn it on again.
CLEANING AND MAINTENANCE
Unplug the device and let it cool down before cleaning. Clean the outer surface of the hot air ventilator with
a damp cloth. Do not use sharp or abrasive agents to clean the device, otherwise the surface can become
damaged.
The hot air ventilator can be put away only after it has been properly turned off, disconnected from the outlet
and cooled down.
TECHNICAL SPECIFICATIONS
Max. input power 2000 W
3 heat settings
Function cool / warm/ hot air (1000 / 2000 W)
Continuous thermostat regulation
Safety cut out switch
Power on indicator
Integrated handle for easy portability
Nominal voltage: 220–240 V~ 50 Hz
Nominal input power: 2000 W
Noise level: 35 dB