28
EN
29
INSTALLATION
Make sure the package contains all parts necessary for assembling the convector. Contact your vendor if this
is not the case.
Package contents:
1. Heat convector: 1 piece
2. Base: 2 pieces
3. Attachment screws: 4 pieces
4. Operating manual: 1 piece
5. Assembly kit for wall attachment
Unplug the device, prior to any form of manipulation, to prevent injury by electric shock.
Installation requirements
Place the convector on a flat surface with a sufficient amount of space around the appliance to ensure the
proper function of exhaust vents
The distance between the device and surrounding objects must be at least 90 cm
.
Caution:
To prevent the device from overheating, do not cover the heater.
The heater must not be placed directly under an outlet.
Base
Attachment screw:
1. Place the convector on a flat surface.
2. Press the base pegs into the holes found on the bottom part of the convector.
3. Tighten the screws carefully and check to see the convector is stable.
