GB
19
OPERATING INSTRUCTIONS
The chopper is intended for chopping fruit, vegetables, meat, nuts, herbs, etc.
Before first use, rinse the attachment and the container well.
1. Hold the blade unit by the top plastic part and attach it carefully on the central protrusion of the bowl. Be
very careful when handling it, the blades of the blade unit are very sharp.
2. Place the food in the mixing bowl according to the processing guide. The volume of the food should not
exceed 2/3 of the container volume. Put the lid on the bowl.
3. Put the base with the motor in correct position in the lid of the bowl and onto the blade unit shaft.
4. Plug the power cord in the electrical outlet.
5. Press the switch on the top of the base briefly and repeatedly to process the foods to desired consistency.
6. After the blade unit completely stops, unplug the power cord from the outlet and only then remove the
base with the motor and the lid of the container.
7. Carefully remove the blade unit from the bowl and lastly, remove the processed foods.
Safety protection: The motor is equipped with a safety circuit, which shuts the appliance off
automatically in case of overload and after cooling enables using it again.
Food processing guide
INGREDIENT
MAX. AMOUNT (g)
MAX. TIME (s)
Onion
200 g (cut into eighths)
5–10 seconds in pulses
Fruit compote
150 g (about 5 g / piece)
10 seconds
Garlic
150 g
5–10 seconds in pulses
Biscuits
20 g
15 seconds
Cheese
80 g
15 seconds
Almonds
80 g
15 seconds
Hazelnuts
80 g
15 seconds
Walnuts
80 g
15 seconds
Hard-boiled eggs
4 egg yolks
5–10 seconds in pulses
Meat
150 g (about 5 g / piece)
10 seconds
Ham
150 g
10 seconds
Liquids
0.3 l
10 seconds
Note:
•
The maximum continuous operation is 20 seconds, let it cool down for at least 2 minutes before using it again.
Otherwise, it might cause overheating and damage.
•
Do not use the chopping blade for hard foods like coffee beans, ice cubes, spices or chocolate.
CLEANING AND MAINTENANCE
Disconnect the appliance from the electrical outlet prior to performing any maintenance. Cleaning should be
always performed on a cooled appliance!
Wipe the base with wet cloth. Never clean it under running water, do not rinse it and do not immerse it in
water! You can clean other parts under running water. Do not wash in the dishwasher. The plastic parts may
change colour after processing coloured foods. Do not use scrubber, abrasive cleaners or solvents. Before
storing the chopper make sure that it is completely cooled off, that it is clean and dry.