GB
32
5. The minutes start flashing on the display. Use
TUNE+
(6) or
TUNE-
(7) to set the minutes and confirm by
pressing the button
MEMO
.
6. The clock is set and shows the correct time.
Setting alarm
1. The alarm time can be set only when the device is switched off when the display shows the clock. The
alarm clock indicator has to appear in the upper right corner of the display. If the alarm indicator does not
appear, press the button
BAND/ALARM
(4). You will turn on this way the alarm mode indicated by an icon
in the upper right corner.
2. Press the button
MEMO
, the hour starts flashing. Use
TUNE+
(6) or
TUNE-
(7) to set the hour and confirm
by pressing the button
MEMO
.
3. The minutes start flashing on the display. Use
TUNE+
(6) or
TUNE-
(7) to set the minutes and confirm by
pressing the button
MEMO
.
4. The icon “rAd” (radio alarm) or “buZ” (buzzer alarm) appears. Use
TUNE+
(6) or
TUNE-
(7) to choose
between those two wake-up modes and again confirm by pressing the button
MEMO
.
5. When the set time is reached, depending on the selected mode it starts automatically the radio or the
buzzer.
6. You can deactivate the alarm function before the set time is reached by pressing the button
BAND/
ALARM
, the alarm clock icon disappears from the display.
7. After setting the alarm you can either turn off the radio or turn it on and listen to the radio. Turning on the
radio does not affect the alarm clock setting.
Radio alarm
1. When you select the radio alarm and the set time is reached the radio automatically turns on.
Note:
When the radio is on before the alarm time, the radio alarm automatically switches at the set time
to buzzer alarm.
2. The radio will play for 1 hour, then the it turns off automatically.
3. You can turn off the radio any time by pressing the button
POWER
(5).
4. If you do not deactivate the alarm by pressing
BAND/ALARM
, it will be activated the next day in the same
time.
Buzzer alarm
1. When you select the buzzer alarm and the set time is reached the buzzer is automatically activated.
Note:
If the radio is on before the set time is reached the buzzer turns on automatically at the set time.
2. The buzzer will be active for 1 hour, then it turns off automatically.
3. You can turn off the buzzer any time by pressing the button
POWER
(5).
4. If you do not deactivate the alarm by pressing
BAND/ALARM
, it will be activated the next day in the same
time.
Snooze function
1. If you want to delay the alarm press at the alarm time the button
BAND/ALARM
(4). The alarm stops for
10 minutes and then starts again. The alarm icon in the display will flash during the snooze time.
2. If you want to turn off the alarm entirely, press the button
POWER
(5). The alarm clock will be active the
next day at the set time.
Sleep with music
The radio can be set so that after a set time (10–90 minutes) shuts down automatically.
1. You can activate this function when the device is off. Press and hold the button
POWER
(5), the display
shows the indicator “SLEEP” and “90”, which means that the time until shut off is set to 90 minutes.
2. You will shorten the interval to shut off each time you press the button
POWER
by 10 minutes. When you
set the desired interval, the radio is turned on and after this time will automatically shut down.
3. You can stop the countdown any time and turn off the device by pressing the button
POWER
(5).