ECG OP 201, Инструкция по эксплуатации

Страница: 14 / 16

14
GB
Functions of the power and speed selection button
First press of the button
3
: starting work, lower speed (3000 rpm)
Second press of the button
3
: switching to higher speed (4000 rpm)
Third press of the button
3
: turning off the device
How to use the attachments in the right order
Make sure that the sanding band (
5
,
6
or
7
) is properly inserted in the device.
Step one 1 – FILING: Attach the coarse sanding band
7
. Gently file and shape the edge of the nail to prevent
ingrown nail. Nail filing helps to prevent damaging them.
Step 2 – SANDING: Attach the fine sanding band
5
. Gently sand the surface of the nail until the unevenness
is smoothed. To prevent any damage to the nail, we recommend to use this 1 × in 14 days. Do not apply
continually in one spot for longer than 15 seconds.
Step 3 – BUFFING: Attach the extra fine sanding band
6
. Buff the surface of the nail until you reach the
required level of shine. Repeat the steps as necessary.
Why to use a nail file
The shape of the sanding band will ensure a professional result in the comfort of your home without a visit to
the nail saloon. Save time and money. The perfect appearance of your nails will last several days.
You can use the sanding band
7
for filing of artificial nails – gel nails.
MAINTENANCE AND CLEANING
Wipe the body of the device using soft, dampened cloth. Do not use aggressive chemicals or solvents for
cleaning. Clean the sanding bands using a dry brush (e.g. cosmetic brush). You cannot wash the sanding bands
under running water.
Replace the cover of the sanding band attachment and store the device in a dry and clean place. Remove
batteries from the device if you do not plan to use the device for a longer period of time.
Note:
You can buy replacement sanding bands under the name ECG NK OP 201
TECHNICAL DATA
Power: 2 × 1,5 V AA batteries (not included)
WARRANTY:
The following situations void the warranty:
Incorrect or inappropriate handling of the device, failure to observe safety measures applicable to the device,
the use of force, alterations or repairs made by a party other than an authorized service centre.
Components subject to normal wear and tear are not covered under the warranty.
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
08/05