20
EN
Description
OPERATING INSTRUCTIONS
Before first use check that the dual voltage is set to 230V!
Before putting into operation
First remove the protective foil from the ironing surface! The iron has to be used and set on a stable
surface.
When ironing for the first time heat up the iron without water to the highest level. During thisa light
smoke and odour may come out of the ironwhich will however soon disappear. Then you may fill the
water tank. Allow the iron after being fi lled and heated to create steam for at least 1 minute andduring
this press the steam burst button several times, to remove potential remains from the manufacturing
process. Before first use on your laundry we recommend that you test the iron on some ordinary cloth,
or wipe.
Filling the water tank
Before filling the water tank pull out the power cord plug from the power socket!
Turn the handle of the iron upwards (pic. 6) Set the temperature regulator to position "•". Hold the iron
in a tilted position and pour water into the filling opening up to the max. mark (pic. 2). Use only water
from a water tap. Using distilled or demineralized water may lower the effectiveness of the decalcification
system by change of the physical and chemical characteristics. Use the container enclosed with the
product for filling it with water. The iron may not be filled with water directly from the tap!
Setting temperature
First sort the laundry that you wish to iron according to the international symbols on the tags of the
laundry. If these are missing, sort the laundry according to the fabric type.
Temperature/steam
regulator
Temperature on
indicator light
Power input protection
Water tank
Button for folding the handle
Ironing area with openings for steaming
Watering nozzle
Lid of opening for filling
Sprinkling button
Steam burst button
Folding handle
Rests
