GB
50
Automatic menu programs
Code
Program
Code
Program
1
Automatic heating
8
Grilled ham
2
Coffee/Tea (200 ml)
9
Grilled bacon
3
Soup (200 ml)
10
Grilled pork ribs
4
Oatmeal
11
Grilled steak
5
Pizza
12
Grilled chicken pieces
6
Pasta
13
Grilled fish slices
7
Popcorn
14
Automatic defrosting
Notes:
1. The results of the automatic cooking depend on factors such as voltage, size and shape of the food, your personal preference and how
you manage to place the food in the oven. If you find the results unsatisfactory, adjust appropriately the cooking time.
2. In case of
pasta
start cooking the dish with boiling water.
3. The microwave stops during the process for programs 8 to 14 to allow you to rotate the dish. Then close the door and press
START/
QUICK START
to continue cooking.
Automatic defrosting
Microwave oven defrosts meat, poultry and seafood. Time and power for defrosting is set automatically after you enter the weight of the
food. The weight of frozen food can be set between 100 to 1800 grams.
Example: Suppose you want to defrost 600g of shrimp.
Place the shrimp you want to defrost in the oven.
1. Press or to select program A-14.
2. Press
OK
or
to enter the weight 600g.
3. Close door and press
START/QUICK START
.
Note:
Beep will sound in the middle of defrosting, indicating the need to rotate the dish. The defrosting stops until you press
START/QUICK START
to start the second phase of defrosting.
TROUBLESHOOTING
If the microwave oven stops working:
1. Make sure that the oven is properly connected to power. If it is not, unplug the power cord from the outlet, wait 10 seconds and then
reconnect properly.
2. Make sure that there is not blown fuse or that circuit breaker was not tripped. If everything seems to be in order, try the functionality
of the outlet using another appliance.
3. On the front panel, make sure it is properly set to the desired program and the clock and timer are correctly set.
4. Make sure that the door of the oven is properly closed and the door lock is secured. Otherwise you cannot start microwave heating.
If none of the above recommendations solves the problem, contact an authorized service center. Do not attempt to repair the device by
yourself!
Error message (E-1):
If there is no detection of feedback signal (impulse) during operation for period of 5 seconds the system operation is interrupted, alarm will
sound and the message “E-1” appears. Press
PAUSE/CANCEL
, to return the appliance to standby mode.
Common operation signals
The microwave oven interferes with the
television reception.
The microwave oven can interfere with the radio and television when operating. It is
similar to the interference of small electrical appliances such as the blender, vacuum
cleaner and electrical ventilator.
Dimming the oven light
Cooking with low microwave power level may dim the oven light. This effect is
normal.
Steam is accumulated on the door, hot air is
coming from vents.
Steam can be released from food while cooking. Most of the steam is released
through the exhaust vents, though some can accumulate in a cooler place, such as
the door. This effect is normal.
The oven was started empty by accident.
The oven should not be operated empty. It is very dangerous.
Содержание MTD 2531 GISB
Страница 2: ......