![ECG MTD 201 GS Скачать руководство пользователя страница 61](http://html.mh-extra.com/html/ecg/mtd-201-gs/mtd-201-gs_user-manual_531185061.webp)
EN
60
EN
61
6. Defrosting according to time
1) Press the
W.T./Time Defrost
button twice and “dEF2” will appear on the display.
2) Set the defrosting duration by turning “
” (maximum setting is 95 minutes).
3) Start the defrosting process by pressing the
Start/+30 Sec./Confirm
button.
7. Cooking in phases
2 different preparation phases at most can be set for cooking. Defrosting as one of the phases should
be set as first. The oven will beep at the end of one phase and continues with the following phase.
Note:
Auto menu cannot be set as one of the phases.
Example: If you want to defrost food for a duration of 5 minutes and then cook it at a power of 80%
for 7 minutes. The setting is as follows:
1) Press the
W.T./Time Defrost
button twice and “dEF2” will appear on the display.
2) Set the defrosting duration to 5 minutes by turning “
”.
3) Press the
Micro./Grill/Combi.
button once, .
4) Set the cooking power to 80% by turning “
”. “P80” will appear on the display.
5) Confirm by pressing the
Start/+30Sec./Confirm
button.
6) Set the cooking duration to 7 minutes by turning “
”.
7) Start the cooking process by pressing the
Start/+30 Sec./Confirm
button.
8. Programming function
1) First set the precise time (see instructions for setting the time).
2) Select the cooking program. Up to two phases can be set. The defrosting process should not be
applied when using the programming function.
Example: If you want to cook at a power of 80% for 7 minutes.
a. Press the
Micro./Grill/Combi.
button once.
b. Set the cooking power to 80% by turning “
”. “P80” will appear on the display.
c. Confirm by pressing the
Start/+30Sec./Confirm
button.
d. Set the cooking duration to 7 minutes by turning “
”.
After going through these steps, do not press the
Start/+30Sec./Confirm
button any more. Perform
the following:
3) Press the
Clock/Pre-Set
button. The two digit number for setting the hours begins to flash.
4) Set the hours between 0-23 via “
”.
5) Press the
Clock/Pre-Set
button, the two digit number for setting the minutes begins to flash.
6) Set the minutes between 0-59 via “
”.
Содержание MTD 201 GS
