ECG MTD 2004 BA, Инструкция по эксплуатации

Страница: 44 / 48

44
GB
4. Set the hour by turning the control knob in the 0-23 range.
5. Press “ CLOCK PRE-SET ,” the display fl ashes the minutes.
6. Set the minutes by turning the control knob in the 0-59 range.
7. Press “ START/+30SEC./CONFIRM ” to fi nish setting. When the programmed time comes, two audio signals sound and the cooking
starts automatically.
Note: This function requires setting the clock. Otherwise, the timer function will not work.
Automatic menu
1. In the standby mode turn the to the right to select one of the automatic programs A-1 to A-8.
2. Confi rm your selection by pressing “ START/+30SEC./CONFIRM .”
3. Turn the to set the weight of the food.
4. Press “ START/+30SEC./CONFIRM ” to start the food preparation.
5. After the cooking is fi nished, you will hear fi ve audio signals.
Automatic menu programs
Menu Weight (g) Display Menu Weight (g) Display
A-1 (warming) 200
400
600 200
400
600 A-2 (vegetable) 200
300
400 200
300
400
A-3 (fi sh) 250
350
450 250
350
450 A-4 (meat) 250
350
450 250
350
450
A-5 (pasta) 50 (+450 ml of water)
100 (+800 ml of water)
50
100
A-6 (potatoes) 200
400
600 200
400
600
A-7 (pizza) 200
400 200
400 A-8 (soup) 200
400 200
400
Child lock
Lock: In the standby mode press “ STOP/CLEAR ” for 3 seconds. You will hear a long beep indicating that the controls are locked and
the display shows “ .”
Unlock: In the locked state press “ STOP/CLEAR ” for 3 seconds. A long beep indicates the release of controls.
Displaying current status
1. If you press the button “ MICROWAVE ,” during the microwave cooking, the current microwave power level will be displayed for
2–3 seconds.
2. In the presets mode you can press the “ CLOCK/PRE-SET ” button to check the remaining time until the delayed start. The set time will
fl ash on the display for 2-3 seconds and then the display will show the clock.
3. You can fi nd the current time during cooking by pressing “ CLOCK/PRE-SET ” (it will be displayed for 2-3 seconds).
General operating instructions
1. When turning the control knob, a beep sounds.
2. If you open the oven door during cooking, you have to press the “ START/+30SEC./CONFIRM ” button to continue cooking.
3. If you set a program and do not press the “ START/+30SEC./CONFIRM ” button within 1 minute, the current time appears on the display
and the program is cancelled.
4. Eff ective pushing of a button is indicated by a beep.
5.
When the cooking is fi nished, you will hear the audio signal fi ve times.