GB
46
OPERATING INSTRUCTIONS
STARTING
Before first use
•
Read all instructions and important information.
•
Remove all packaging material and make sure that all the supplied parts are in good condition.
•
Place the multifunctional pot on an even, heat resistant and non flammable surface.
•
Remove all stickers from the pot surface and clean it using damp dish towel.
•
Wash all accessories in warm soapy water using a sponge or dish towel.
•
Rinse off the detergent well and dry everything thoroughly.
•
Do not use abrasive cleaners or scrubbers.
•
Never immerse the appliance, cable or plug in water.
Start
•
Before use, always check for damaged power cord or plug.
•
First, insert plug in the appliance, then plug the cable into the electrical outlet.
•
A tone sounds and the pot switches into standby mode.
•
The LED display shows “- - - -”, which means that the pot is in a standby mode.
•
The pot is ready for cooking.
General procedure for meal preparation
•
Prepare the food you want to cook according to the recipe.
•
Put the food in the cooking vessel.
•
Press
MENU
to select cooking mode according to the recipe.
•
Press
START
to begin the food cooking process.
•
When finished cooking, switch off the appliance by pressing
OFF/WARM
.
Note:
When you forget to press
START
,after selecting the cooking mode, the pot will beep continually for 10 seconds
and after 60 seconds will switch to standby mode. If this happens, press the button
ON/START
and the cooking
process will start at once.
•
You can cancel the activated program by pressing
OFF/WARM
. The pot switches to standby mode. You can start
programming again.
COOKING MEALS
MANUAL mode
1. Prepare food for baking according to the recipe.
2. Insert the removable cooking vessel in its place.
3. Press
MANUAL
; the indicator “MANUAL” starts flashing. The LED display shows the default baking time.
4. You can extend the default baking time using the buttons
HOUR
(hours) and
MIN
(minutes). After reaching
maximum time (8 hours) the setting returns to minimum time (10 min) and using buttons
HOUR
and
MIN
your can set again a different baking time.
5. Then press
TEMP
and with buttons
HOUR
(+) and
MIN
(-) adjust the baking temperature in range of
40°C – 180°C. If you want to adjust at that time the baking time, press again
TEMP
, the baking time will show
and you can adjust it using the buttons
HOUR
and
MIN
.
6. Press “
START
” to confirm the setting and start food preparation. Once the baking process starts it is no longer
possible to change the program manually. If you would need to adjust the time or the temperature you have to
press first the button “off/warm” to cancel and then set a new time and temperature using the button MANUAL.
7. After the set time finishes, the multifunctional pot beeps and automatically switches to “keep warm” mode. The
LED display shows the time of temperature maintenance, starting with “0000”.
8. Until you press
OFF/WARM
to cancel the program, the food will be kept warm for up to 24 hours.
RICE mode
1. Prepare food for the RICE mode according to the recipe.
2. Insert the removable cooking vessel in its place.
3. Press
MENU
repeatedly until the indicator “RICE” lights up. The LED display will show the default cooking time.
Содержание MH 910
Страница 2: ...1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 A B C D ...
Страница 126: ......
Страница 127: ......