15
GB
•
The iron is not suitable for synthetic wigs and hair extensions.
Using the curling iron
1. Place the curling iron on a fl at heat-resistant surface and make sure the surface does not touch the curling
iron barrel.
2. Plug the curling iron into the electric outlet and switch ON via the slider
3
. A red LED indicator lights up
4
and the curling iron begins to warm up.
Making curls
1. The tip
7
remains cool during operation and allows you to style your hair with both hands.
2. Using the clamp
5
hold a lock of hair and push it onto the warm barrel
6
.
3. Move the curling iron towards your hair ends and then roll the lock several times in the desired direction.
Do not put thick locks of hair on the tube a once.
4. Leave your hair on the curling iron for about 10-20 seconds, depending on the structure and length of
your hair.
5. Use the holder
2
to release the clamp
5
and pull the curling iron out. The ceramic surface of the barrel
will ensure the curling iron slides out easily.
6. After pulling the curling iron out, roll the curl around your fi nger and secure with a hairpin.
7. Repeat the procedure until you have the hair you desired.
8. Before making fi nishing touch-ups, allow your hair to cool down to ensure your hairdo lasts longer.
9. Once the curls have cooled down (about 5-10 minutes), remove the hairpins and comb your hair.
10. You can fi nish your hairstyling by applying balsam or hairspray.
CLEANING AND MAINTENANCE
•
There are no components for the user to adjust inside the device, all repairs shall be carried out by
a qualifi ed repair centre!
•
Disconnect the appliance from the electrical output prior to performing any maintenance.
•
Cleaning should always be performed on a cooled down appliance and regularly after every use!
•
Clean the curling iron surface with a slightly damp towel and wipe dry.
•
Do not immerse the curling iron into water!
•
Do not use aggressive cleaning agents or abrasive substances for cleaning.
•
Always make sure the curling iron is completely cooled, clean and dry before putting it away.
TECHNICAL DATA
Diameter of handle 25 mm
Nominal voltage: 100–240 V ~ 50/60 Hz
Nominal input power: 38–41 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
08/05
