ECG HH 920, Руководство по эксплуатации

Страница: 22 / 24

EN
20
EN
21
Front part
5. Top cover
6. Protective stator grid
7. Halogen tube
8. Reflector
9. Grid
10. Protective grid
11. Main cover
12. Base
Back
13. Handle
14. Power input
Bottom
15. Wing nuts (2)
16. Safeguard against tipping over
17. Power input anchoring
qg
qh
qj
qd
qf
1
2
3
4
5
6
9
qa
qs
q;
7
8
USING THE APPLIANCE
This power regulated halogen heater is also equipped with the side to side rotation oscillation function.
To activate this function, press the
TURN button. Deactivate the function by pressing the button one
more time.
The halogen heater network switch has 3 settings (see fig. Control panel).
1. Turn the device on by pressing the
POWER button and middle halogen tube will automatically
begin heating at 400 W.
2. If you press one more 400 W button, you will achieve a total power of 800 W.
3. The power will reach the maximum value of 1200 W by pressing the 3rd 400 W button. You can
select the buttons at random, according to whether you would like the bottom or top part of the
halogen heater to heat.
Safeguard against tipping over
1. The device is equipped with a safeguard against tipping over, which will switch the heater off in
case it is tilted or tipped over.
2. If the heater experiences overheating, disconnect the device from the outlet and leave it to cool
down for 10 minutes. Afterwards, you may connect the device and turn it on again.