English
English
19
Emptying the water tank
1. Pull out the compartment cover and carefully remove
the tank.
2. Empty the water from the tank.
3. If fibres collect on the tank cover, clean it with water.
4. Replace the water tank back in place.
IMPORTANT NOTE:
Never remove the water tank while a
program is running. Water condensed in the water tank is
not suitable for human consumption.
IMPORTANT NOTE:
DO NOT FORGET TO CLEAN THE WATER
TANK AFTER EACH PROGRAM RUN.
Cleaning the heat exchanger
IMPORTANT NOTE:
If you see warning “Heat exchanger
cleaning”, clean the heat exchanger.
IMPORTANT NOTE:
EVEN IF THE INDICATOR “HEAT
EXCHANGER CLEANING” IS NOT ON: CLEAN THE HEAT
EXCHANGER AFTER EACH 30 DRYING RUNS OR ONCE A
MONTH.
If the drying process is finished, open the loading door and wait until it cools.
1. Open the cover plate cover as shown.
2. Unlock the heat exchanger.
3. Remove the cover of the heat exchanger as shown in the picture.
4. Clean the front area of the heat exchanger according to the picture.
5. Install the heat exchanger cover according to the picture.
6. Lock the heat exchanger.
7. Close the cover plate according to the picture.
WARNING:
THE HEAT EXCHANGER STABILIZERS ARE SHARP. DO NOT TRY TO CLEAN
THEM MANUALLY. THE STABILIZERS CAN DAMAGE YOUR HANDS.
Cleaning the humidity sensor
There are humidity sensors inside the appliance, which determine if the laundry is
dry or not.
To clean the sensors:
1. Open the loading door.
2. If the machine is still hot due to drying, wait for it to cool.
11
2
