GB
GB
32
USE
The FT 30a/FT 40a fan has 3 speeds, fan 23a has 2 speeds. Its rotating head ensures smooth rotation. It is quiet,
with a low energy consumption, reliable and safe and at the same time, ensures effective air circulation.
0 - Fan is off.
1 - Fan is running at low speed.
2 - The fan runs at a higher speed.
3 - The fan runs at highest speed (only the FT 30a/FT 40a fan).
•
The fan can rotate during operation.
•
For the fan head to rotate, push the automatic rotation control down.
•
To stop the rotation of the fan head, pull the automatic rotation control up.
•
The fan head can be set up or down. Loosen the vertical setting nut, adjust the desired angle of the fan
and tighten the nut again.
CLEANING AND MAINTENANCE
1. The fan must be switched off and the cord disconnected from the outlet prior to cleaning.
2. Wipe the surface of the fan with a clean and dry cloth. If the fan is very dirty, it can be dismantled and
the individual parts (except the power cable) can be cleaned with a cloth or sponge slightly moistened
detergent solution. Then wipe dry thoroughly all parts. Make sure that no water gets into the motor during
cleaning.
3. When dismantling the fan, proceed in reverse order of the assembly.
4. Store the ventilator in a dry and clean place away from children.
We recommend to keep the packaging for possible transportation or storage of the fan.
•
Protect the appliance from water and high humidity!
•
Do not immerse the fan in water!
•
Do not use thinner, petrol or other aggressive cleaning agents for cleaning.
•
You can use vacuum cleaner with a dust nozzle to clean the grilles.
TECHNICAL DATA
FT 23a
Diameter: 23 cm
Number of speeds: 2
Nominal voltage: 220–240 V~ 50 Hz
Nominal input power: 21 W
Noise level: 50.1 dB
FT 30a
Diameter: 30 cm
Number of speeds: 3
Nominal voltage: 220–240 V~ 50Hz
Nominal input power: 40 W
Noise level: 54.3 dB
FT 40a
Diameter: 40 cm
Number of speeds: 3
Nominal voltage: 220–240 V~ 50Hz
Nominal input power: 50 W
Noise level: 58.3 dB
Содержание FT 23a
Страница 63: ......