ECG EWF 1062 DA+++, Инструкция по эксплуатации

Страница: 60 / 72

GB
60
• The amount of laundry should not be more than 2 kg.
• After completing the program, remove the laundry from the machine as soon as possible to prevent
it from wrinkling.
• You cannot set delayed start for this program.
• To avoid damage to the laundry, the temperature should not exceed 40°C.
• Please, separate the whites from colored and dark items and wash separately.
• Use detergent specifically designed for wool clothing to avoid damage.
Using the program Bed linen and curtains
The program is designed to wash bed linen, curtains, bedding and similar textiles marked with a machine wash
symbol.
1. Perform the steps described in the “Starting wash” section, select the “Bed linen and Curtains” program
using the control knob.
2. Set the required temperature and the spin speed.
3. Then start the program by pressing Start/Pause .
4. When the washing program is finished, a beep sounds and the message “END” appears on the display.
5. Open the washing machine door, remove the laundry. Switch off the washing machine and close the water
supply.
•
If you want to change the program setting during the wash, cancel the program by pressing
Start/
Pause
and select the required program.
• Electric blankets and other blankets can not be washed in the washing machine, they could be
damaged as well as cause damage to the washing machine.
• Try to load your laundry evenly in the washing machine, so that it does not cause excessive shaking
during spin. Uneven distribution of laundry may prevent spinning, display shows the error code “UE”.
In this case, remove the laundry and try to distribute it more evenly in the drum.
• Heavy and bulky laundry items should not be tangled together, try to separate and shake them
before loading them into the washing machine.
Using the Cotton blend program
In this program you can wash clothing made of cotton, clothing with admixture of synthetics, etc. (do not wash
together clothing that easily bleeds colour).
1. Perform the steps described in the “Starting wash”, section and select the “Cotton blend” program using
the control knob.
2. Set the required temperature and the spin speed.
3. Then start the program by pressing
Start/Pause
.
4. When the washing program is finished, a beep sounds and the message “END” appears on the display.
5. Open the washing machine door, remove the laundry. Switch off the washing machine and close the water
supply.
•
If you want to change the program setting during the wash, cancel the program by pressing Start/
Pause and select the required program.
• To avoid damage to the laundry, do not set the highest spin speed and you cannot set the temperature
higher than 60°C and 90°C.
• Separate whites and coloured items before wahsing.
Using the Synthetics program
The program is designed for washing clothing made of synthetic fabrics.
1. Perform the steps described in the “Starting wash” section and select the “Synthetics” program using the
control knob.
2. Set the required temperature and the spin speed.
3. Then start the program by pressing Start/Pause .
4. When the washing program is finished, a beep sounds and the message “END” appears on the display.