
GB
61
5. Open the washing machine door, remove the laundry. Switch off the washing machine and close the water
supply.
•
If you want to change the program setting during the wash, cancel the program by pressing
Start/
Pause
and select the required program.
•
To avoid damage to the laundry, you cannot set the highest spin speed and set the temperature
higher than 90°C.
Using the Infant wear program
This program can sterilize the laundry and get rid of mites using high temperature.
1.
Perform the steps described in the “Starting wash” section and select “Infant wear” program using the
control knob.
2.
Set the required temperature and the spin speed.
3.
Then start the program by pressing
Start/Pause
.
4.
When the washing program is fi nished, a beep sounds and the message “END” appears on the display.
5. Open the washing machine door, remove the laundry. Switch off the washing machine and close the water
supply.
Using the program Fast 15 min.
Program for washing of daily worn, only slightly soiled clothing and thin garments.
1.
Perform the steps described in the “Starting wash” section and select the program “Fast 15 min.” using the
control knob.
2.
Set the required temperature and the spin speed.
3.
Then start the program by pressing
Start/Pause
.
4.
When the washing program is fi nished, a beep sounds and the message “END” appears on the display.
5. Open the washing machine door, remove the laundry. Switch off the washing machine and close the water
supply.
•
If you want to change the program setting during the wash, cancel the program by pressing
Start/
Pause
and select the required program.
•
To prevent damage to the clothing you cannot set the highest spin speed and the water temperature
can be set only to “cold”, 20°C, 40°C.
•
Weight of the laundry should not exceed 2 kg in order to provide good quality wash.
Using the program Spin
This program allows extra wringing out of the laundry.
1.
Perform the steps described in the “Starting wash” section and select the “Spin” program using the control
knob.
2.
The default setting is 800 rpm. Press the button
Spin speed
to set the required rotations of the spin.
3.
Start the spin by pressing the button
Start/Pause
.
4.
The draining and spinning starts. A beep sounds when program is fi nished.
5. Open the washing machine door, remove the laundry. Switch off the washing machine and close the water
supply.
•
Make sure there are no foreign objects in the drum before spinning to avoid damaging the washing
machine.
•
The spin speed does not have to match the set value during the course of the program. The washing
machine adjusts the speed during spinning in order to achieve optimum balance of the laundry.
•
Rhythmic humming may sound during spinning. This sound is a normal feature of the drain pump, it
is not a malfunction.
Other washing machine functions
Self-cleaning function
High water levels, high temperature and high spin speed allow this function to disinfect the inside of the
washing machine and kill germs.
Содержание EWF 1062 DA++
Страница 2: ......