GB
GB
57
The “Cotton to Closet” program used at full and partial load is the standard drying program
for which information on the label and information sheet is relevant. This program is the most
energy efficient program for drying normal wet cotton laundry.
* Energy label standard program (EN 61121: 2013)
All values in the table have been determined in accordance with EN 61121: 2013. Consumption values may
differ from the values in the table depending on the type of fabric, the method of spinning, ambient conditions
and variations in voltage.
Additional functions
The table below summarizes the options that can be selected in the programs is provided below.
Option
Description
Level of
drying
Stupeň
sušení
The moisture obtained after drying can be increased by 3 levels. In this way, the
desired level of dryness can be selected. Levels that can be selected other than the
default: 1, 2, 3. When selected, the corresponding drying level indicator lights up.
Wrinkle
free
Proti
mačkání
If you select the option “Wrinkle free” and do not open the dryer door at the end of
the program, 1 hour of the wrinkle protection phase is extended to 2 hours. When
you select “Wrinkle free”, you will hear a sound notification. To cancel this option,
press the same button again. If you open the appliance door or press the Start /
Pause button during the wrinkle protection phase, this phase will be cancelled.
Delayed
start
Odložený
start
You can delay the program start time by selecting 1 to 23 hours. You can activate
the desired delay time by pressing the Start/Pause button. The selected program
starts automatically after the selected time passes. During the delay period,
options compatible with the program can be activated/deactivated. Holding the
Delay Start button repeatedly changes the delay time.
Cancelling
the sound
alert
Zrušení
zvukového
upozornění
The dryer will give an audible warning when the program selection knob turns,
buttons are pressed, and at the end of the program. To cancel the sound alert,
press and hold the “Wrinkle free” button for 3 seconds. When you press the button,
you will hear a sound alert that this option is cancelled.
Drying
time
Čas sušení
If the knob is in the Dry Time program position, the option can be selected by
pressing the Dry Time button and the program is started by pressing the Start/
Pause button. Hold the Dry Time button to change the time repeatedly.
Child lock Dětská
pojistka
There is a child lock option to prevent program changes when buttons are pressed
during running of the program. To activate the Child Lock, press the “Start Delay”
and “Wrinkle free” buttons simultaneously for 3 seconds. If the child lock is active,
all buttons will be deactivated. The child lock will be automatically deactivated at
the end of the program. When activating / deactivating the child lock, “CL” appears
on the display for 2 seconds and then disappears and an alert sounds.
Notice:
when the appliance and the child lock are activated, if you turn the knob
for program selection you will hear a sound alarm and the display shows for
2 seconds “CL” and then it disappears. Even if you set the program knob to another
program, the previous program will continue. To select a new program, you must
deactivate the child lock and then set the program selection knob to the “OFF”
position. Then you can select and start the required program.
Program start
The Start/Stop LED flashes during program selection. Press the Start/Pause button to start the selected
program. The Start/Pause LED lights up to indicate that the selected program is running. At the same time, the
drying LED lights up.