English
English
21
TROUBLE
CAUSE
SOLUTION
The dryer cannot be opened
or the program cannot be
started. The dryer does not
start when it is set.
The dryer is not plugged in.
Make sure the dryer is plugged into
the power network.
Loading door is open.
Make sure that the loading door is
fully closed.
A program is not selected or you did
not press the button Star/Pause.
Make sure that a program is selected
and the appliance is not in the pause
mode.
Child lock is activated.
Deactivate the child lock.
The program stops without
any cause.
The loading door is not fully closed.
Make sure that the loading door is
fully closed.
There was a power outage.
Press the Start/Pause button to start
the program.
The water tank is full.
Empty the water tank.
Laundry shrank, it is felted or
damaged.
It is likely that the selected program
was not suitable for the type of
laundry.
Check the clothing labels and select
a program suitable for the type of
fabric.
Water leaks from the loading
door.
Dust has accumulated on the inside
of the loading door and on the door
seal surfaces.
Clean the inside of the loading door
and the loading door seal surface.
Loading door opens by itself.
The loading door is not fully closed.
Push on the door until it clicks.
The water tank symbol is lit/
flashing.
The water tank is full.
Empty the water tank.
The drain hose is bent.
If the product is connected directly
to waste, check the drain hose.
The filter cleaning alert
symbol is lit.
The filter is dirty.
Clean the filter.
The filter cleaning alert
symbol is flashing.
The filter is clogged with fibres.
Clean the filter drawer.
The layer causes an obstruction on
the surface of the fibre filter.
Wash the dust filter with warm
water.
The heat exchanger is clogged.
Clean the heat exchanger.
AUTOMATIC MALFUNCTION ALERTS AND WHAT TO DO
Your tumble dryer is equipped with a built-in malfunctions detection system, which are indicated by
a combination of flashing operating lights. The most common error codes are listed below.
Error code
Solution
E03 /
Empty the water tank, if the problem persists, contact your nearest authorized
service representative.
E04
Contact your nearest authorized service representative.
E05
Contact your nearest authorized service representative.
E06
Contact your nearest authorized service representative.
E08
There may be voltage fluctuations in the power supply. In this case, wait until the
voltage value returns to the operating range.
