ECG EH 1886 Double, Инструкция по эксплуатации

Страница: 7 / 80

English English
7
• To ensure safety when finished, turn the switch to the off position and unplug the power cord. When the
pot cools down entirely, you can clean it.
CLEANING AND MAINTENANCE
After each use
• After use, switch off the appliance and unplug the power cord.
• Allow all parts to cool before cleaning.
• Wash the steam insert and the lid in warm water with detergent, rinse and dry.
• We do not recommend washing parts of the appliance in a dishwasher, aggressive agents and hot water
can cause stains and other damage to parts of the appliance.
• Do not use abrasive cleaners, scouring pads or wire brushes and abrasive sponges, as those could damage
the non-stick surface.
•
Do not immerse the body of the appliance in water or other liquids.
• You can wipe the stainless steel body of the pot with a damp cloth and then dry it.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
1 Indicator is
not on.
The hot plate is
not hot
The power is not connected
Check if the switch / plug / output fuse
and power cord is all right or not.
The hot plate
is hot
1. The connection inside the
appliance is loose.
2. The indicator light is
damaged.
1. Reconnect them.
2. Replace them.
2
The
indicator is
on.
The hot plate is
not hot
1. Connection is loose.
2. The electric heating pipe
was burned.
1. Contact your after-sales service
2. Contact your after-sales service
3
The cooking time is too long
or it is difficult to bring water
to boil.
1. The pot was deformed.
2. The temperature is not set
high enough.
1. Adjust the pot to ensure full
contact with the heating plate.
2. Turn the switch to the right to set a
higher temperature.
4 You can hear creaking sounds
during cooking.
It is caused by the heating
plate expanding with heat
during heating
This is normal, you can continue to use
the appliance
TECHNICAL SPECIFICATIONS
Capacity: 3 l
Nominal voltage: 220–240 V~ 50–60 Hz
Nominal input power: 900 W