GB
50
The procedure to set the water hardness
Based on water hardness test, set the softener according to the hardness of tap water as follows.
•
Set the program selector/switch (4) in the position 1.
•
Press and hold the button Start/Pause (3).
•
By turning one step clockwise set the program selector/switch (4) to position 2.
•
Keep the Start/Pause button (3) pressed until all indicators start fl ashing. After that the hardness indicator
appears, which shows a predefi ned state (see chart on previous page).
•
Now you can repeatedly press the Start/Pause button (3) to change the settings according to the water
hardness setting table.
•
Once you set your desired hardness, switch off the appliance by turning the program selecto /off switch (4)
to position 1. The last selected water hardness setting will be saved.
Attention:
In case that you move house, adjust after moving again the water hardness according to the water
quality in your new home. This is necessary for optimum dishwashing.
Using detergent
The detergent contains chemicals necessary to dissolve and remove dirt from dishes and wash them out of the
dishwasher. For these purposes are suitable most of the quality generally available detergents.
Proper use of detergent
Use only detergents designed for use in dishwashers. Store detergents in a dry and clean place. Add detergent
in the dispenser only immediately before you start to wash dishes. Fill the dispenser with the necessary
amount of detergent only. Excessive amount of detergent can cause scratching of glasses and may lead to
poor dissolution of the detergent. Contact the detergent manufacturer for more information.
Filling the detergent dispenser
1. If the dispenser lid is closed, push on the latch to open it, see fi gure
1
.
2. The dispenser compartment is provided with marks, which allow to measure
the amount of the detergent. You can fi ll in the dispenser at maximum 40 cm
3
of
detergent.
3. When you open the dispenser pour in the larger compartment
B
25 cm
3
of the
detergent (in case of heavily soiled dishes) or 15 cm
3
(in case of less soiled dishes),
see fi gure
2
.
4. When the dishes were left for a long time without being washed and the residue
of food dried or if the dishwasher is fi lled to the maximum, pour 5 cm
3
of the
detergent in the prewash compartment
A
and start the dishwasher.
•
Depending on the degree of soiling and the water hardness you may have to
add more detergent.
5. Close the lid of the dispenser and press it to close.
Using combination tablets “3 in 1”
General recommendations
These products are detergents with integrated rinse aid and softener (salt). In case of tablets 2in1 you have to
watch what ingredients the tablets contain (if det rinse aid or det salt).
Generally, combination products are suffi
ciently eff ective only under certain conditions, because they contain
a predetermined amount of detergent and rinse aid / salt.
Содержание EDF 6013 WA+
