72
EN
TROUBLESHOOTING
Please, check the cabling connections fi rst, before you bring the unit for repair. If problems persist even after
applying the recommendations in this table, contact your nearest authorized service.
Symptom
Cause
Solution
No power.
The ignition of your car is not on.
When the power is connected to the
circuit for accessories, but the motor
is not running, switch the ignition key
to “ACC” position (accessories turned
on).
Burned out fuse.
Change fuse.
No audio.
The volume is set to minimum.
Set the volume to desired level.
Incorrectly connected cabling.
Check the cabling connections.
The control buttons do not
work.
The internal microprocessor of
the device is blocked due to
interference.
Press the RESET button.
The control panel is not properly
attached to the device.
The radio does not work. The
automatic tuning of the radio
stations does not work.
The antenna cable is detached.
Firmly insert the antenna cable.
The signals are too weak.
Tune the station manually.