ECG 43FSL231, Инструкция по эксплуатации

Страница: 30 / 88

English English
30
• If you have performed a manual tuning, check that you have selected the correct frequency.
No image
• The TV is not receiving any signal. Make sure the correct input source has been selected.
• Is the antenna connected correctly?
• Is the antenna cable connected correctly?
• Are the appropriate plugs used to connect the antenna?
• If in doubt, contact the dealer.
No audio
• Check that the TV sound is not muted. To cancel the mute, press the Mute button or increase the volume.
• Sound can only come from one speaker. Check the balance settings from the sound menu.
Remote controller does not operate
• The batteries may be dead. Replace old batteries with new ones.
• Maybe the batteries are inserted incorrectly. See "Inserting batteries in the remote control"
No signal on input source
• It is possible that no device is connected.
• Check the AV cables and connections from the device.
• Check that the device is switched on.
The image is not centered in the VGA source
If you want your TV to automatically centre the picture, enter the PC Position menu in the Picture menu,
highlight
Auto Position
and press
OK
. Wait for the process to complete. To manually adjust the position of the
image, you can use the H Position and V Position options. Select an option and set it using the left and right
directional buttons on the remote control.
Information about DVB functions
This DVB receiver is only suitable for use in the country for which it was designed.
Although this DVB receiver complies with the latest DVB specification at the time of manufacture, we cannot
guarantee compatibility with future DVB broadcasts due to changes that may occur in broadcast signals and
technologies.
Some digital features may not be available in all countries.
We are constantly striving to improve our products and therefore specifications are subject to change without
notice.
For advice on where to buy accessories, contact the store where you purchased the equipment.
PC input typical display modes
The following table lists some typical video display modes. Your TV may not support all resolutions.
Index Resolution Frequency
1 640x480 60 Hz
2 640x480 75 Hz
3 800x600 56 Hz
4 800x600 60 Hz
5 800x600 72 Hz
6 800x600 75 Hz
7 1024x768 60 Hz
8 1024x768 70 Hz
9 1024x768 75 Hz
10 1152x864 75 Hz
11 1280x768 60 Hz
12 1360x768 60 Hz