English
English
9
•
HbbTV
•
Ethernet (LAN) for internet connection
High Dynamic Range (HDR) / Hybrid Log-Gamma (HLG)
With this feature, the TV can reproduce a greater dynamic range of luminance by capturing and then combining
several different exposures. HDR/HLG promises better image quality with brighter, more realistic highlights,
more realistic colours and other improvements. It delivers the look that the filmmakers were trying to achieve,
allowing hidden areas of dark shadows and sunlight to come through with full clarity, color and detail. HDR/
HLG content is supported via native and portal applications, HDMI, USB inputs and via DVB-S broadcasting.
Included accessories
•
Remote controller
•
Batteries: 2 x AAA
•
Operating manual
•
Network cable
Emergency notifications
If the TV does not receive any signal (e.g. from an antenna or HDMI source) for 3 minutes, it will switch to
standby mode. When the TV is switched on again, the following message appears: "The TV automatically
switches to standby mode because it hasn't received any signal for a long time." You can disable this feature by
setting the
No signal timer
option in
Settings
>
Devices
accordingly.
The
Automatic TV off
option (in
Settings
>
System
>
More
) can be set to between 1 and 8 hours by default.
If this setting is not set to Off and the TV has been left on and not operated after the set time has elapsed, it
will switch to standby mode after the set time has elapsed. When the TV is switched on again, the following
message appears: "The TV automatically switches to standby mode because no operation has been performed
for a long time." A dialog box appears before the TV switches to standby mode. If you do not press any
buttons, the TV will switch to standby mode after 5 minutes. To immediately put the TV into standby mode,
highlight the
Yes
button and press
OK
. If you highlight
No
and press
OK
, the TV will remain active. You can also
deactivate the
Auto Shutdown
feature in the dialog box. Mark
Disable
and press
OK
, the TV will remain active
and the function will be cancelled. You can re-enable the feature by changing the settings for
Auto Power Off
in
Settings
>
System
>
More
.
CONTROL BUTTONS AND TV OPERATION
Note:
The position of the control buttons may vary depending on the model.
Your TV has a single control button. This button allows you to control functions on the TV
such as
Power/Source/Programs
and TV.
One-button control
•
Press the control button to display the function selection menu.
•
Then press the button one at a time to focus on the option you need.
•
Hold the button for 2 seconds to activate the selected option. The colour of the
option icon will change when activated.
•
Press the button again to use this function or to enter a submenu.
•
To select a different function, you must first deactivate the last activated option.
•
Press and hold the button to deactivate it. The colour of the option icon changes when you deactivate it.
•
To close the function menu, do not press the button for approximately 5 seconds. The menu of feature
options disappears.
Turning off the TV:
Press the control button to display the function options menu, the focus will be in Standby
mode. Hold the button for 2 seconds to activate this option. The colour of the option icon will change when
activated. Press the button again to turn off the TV.
Turning on the TV:
Press the control button and the TV will switch on.