71
EN
INSTALLATION
Installing the device
•
Place the unit within the room so that the display is not exposed to direct sunlight.
•
Complete darkness or refl ections on the screen can cause eye fatigue. Soft indirect light is recommended
for comfortable viewing.
•
Leave enough space between the device and wall to allow suffi
cient air circulation.
•
Stay away from excessively warm areas to prevent damaging the case of the device or the premature
ageing of components.
•
Do not cover ventilation holes.
Instructions for assembling the stand
1. Place the device on a fl at service with the screen facing
down. Use a blanket or other soft fabric to protect the
display.
2. Slide the stand into the holder and fi rmly tighten with the
included screws.
Antenna connection
Outdoor antenna or home distribution system
Note:
Antenna connection: IEC (female connector).
Input impedance: 75 Ω asymmetric.