ECCOTARP ET-ROLLER 5 Скачать руководство пользователя страница 13

Important contact information

Qualified service: 
ECCOTARP USA, inc. 
357 West 36th Street 
New York, NY 10018 
USA

[email protected] 
T: 1 929-272-2336

Repair

Any repair work must always be done by the manufacturer’s qualified personnel. In order to report any faults, spare parts 
orders or complaints, please contact only our qualified service department.

Warranty conditions

The warranty period is stated in the warranty certificate, which is delivered with the product. The warranty period is 
24 months and begins on the day indicated in the warranty certificate. The warranty does not apply to the normal wear 
and tear (e.g. gradual decrease in battery capacity) or to damage caused by improper use or non-compliance with the 
information provided in these Instructions for Use.

Disposing of a damaged device or its parts

The device or its parts must not be disposed of with household/municipal waste. At the end of its lifetime, the device must 
be taken to a waste collection point for environment-friendly disposal or returned to the manufacturer. A charger, that is past 
service, must be taken to an electric waste collection point or returned to the manufacturer.

EU DECLARATION OF CONFORMITY No. 01032020/M

Metal Arsenal s.r.o., Poděbradova 1920, 289 22 Lysá nad Labem, Czech Republic, hereby declares, at its sole liability, that the 
following product

ET-ROLLER 5 

Electric roller for fire hoses up to 5"

(A winder intended for winding fire hoses with couples of the maximum size of 5" and maximum length of 164 ft. It includes 
a 36V DC battery charger.) complies with applicable harmonized standards of the European Union.

The above is verified according to Government regulations no. 118/2016 Sb., which is equivalent to a Council Directive 
2014/35/EU Government Regulation no. 117/2016 Sb., which is equivalent to a Council Directive 2014/30/EU, ČSN EN 60335-
1 ed. 2, ČSN EN 61000-6-3 ed. 2, ČSN EN 55014-1 ed. 4.

13

Содержание ET-ROLLER 5

















Отзывы: