Ecco ED3777 Series, Инструкция по установке и эксплуатации

Страница: 2 / 15

Wire: ED3777
1 Light Head
1 Multi-Mount Base:
Includes-
2- M4x25 Sheet metal screws
2- Split washers
4- M3.5x10 screws
2- M3 washers
1 Adhesive Pad
1 1- EVA foam gasket
1 Edge Mount Bracket
1 Surface Mount Bezel
CONTENTS:
Input Voltage 12-24VDC
Work Current ED3777 = 1.8A Max @ DC12V
ED3777XX = 3.6A Max @ DC12V
SPECIFICATIONS:
Important!
This unit is a safety device and it must be
connected to its own separate, fused power point to assure its
continued operation should any other electrical accessory fail.
Caution:
When drilling into any vehicle surface, make sure the
area is free from any electrical wires, fuel lines, vehicle upholstery,
etc. that could be damaged
Mounting:
RED: Positive (need to add 2A Fuse)
BLACK: Negative
BLUE: Pattern Switch
YELLOW: Synchronized Function
(Up to 8 units can be Synchronized)
ORANGE: Takedown Light Operation (need to add 2A Fuse)
GREEN: Ground Light Operation (need to add 2A Fuse)
Operation Environment:
Ambient Temperature:
-30 to 50°C
Wire: ED3777XX
RED: Positive, Colors 1 & 3 (need to add 5A Fuse)
WHITE: Positive, Colors 2 & 4 (need to add 5A Fuse)
BLACK: Negative
BLUE: Pattern Select to negative
YELLOW: Synchronized Function
(Up to 8 units can be Synchronized)
ORANGE: Takedown Light Operation (need to add 2A Fuse)
GREEN: Ground Light Operation (need to add 2A Fuse)
RED WHITE
PRODUCT 1 & 3 COLORS 2 & 4 COLORS
ED3777AW AMBER WHITE
ED3777BW BLUE WHITE
ED3777RB RED BLUE
ED3777RW RED WHITE
ED3777AG AMBER GREEN
ED3777AB AMBER BLUE
ED3777AR AMBER RED
Surface Mount
Edge Mount
Adhesive Mount
Permanent Mount
PHASE OPERATION:
Phase 1 (Ph1) flashes simultaneously with Ph1
Phase 2 (Ph2) flashed simultaneously with Ph2
(Up to 8 units can be Synchronized)
Apply BLUE TO BLACK wire:
-Less than 1 sec. for next pattern
-Between 1-3 sec. for previous pattern
-Between 3-5 sec. for factory default pattern
-More than 5 sec. default to pattern #13 (ED3777) and pattern
#12 (ED3777XX)
Page 2 of 9