Page 2 of 16
The Running Board lights for the 2013-2019 Ford Explorer fit under the vehicle’s running board and provide a lateral facing signal from the
side of the vehicle.
2013-2019 FORD EXPLORER
Step 1.
From under the vehicle: Test fit the provided brackets to achieve the location needed for the mounting hole on the vehicle. Mark all
four (4) hole positions needed.
Note: Position brackets to avoid cutouts in pinch weld for jack clearance.
Step 2.
Drill the mounting holes into the vehicle using a #34 drill bit.
Step 3.
Using the provided screws, securely mount the bracket to the vehicle and the unit as shown in Figure 1.
Step 4.
Repeat the process for the opposite side running board.
Step 5.
Route the lights wiring as desired.
Note: Instructions are made using Driver’s Side as example. To Reproduce results, revisit each step for Passenger Side.
Installtion and Mounting Instructions:
Figure 1
