Page 13 of 16
2020 FORD EXPLORER
The Running Board lights for the 2020 Ford Explorer fit under the vehicle’s rocker panels and provide a lateral facing signal from the side of
the vehicle.
Step 1.
Mount the brackets to the light unit using the provided screws. (See Figure 1)
Step 2.
From under the vehicle: Test fit the provided brackets to achieve the location needed for the mounting hole on the vehicle. Mark all
four (4) hole positions needed.
Step 3.
Drill the mounting holes into the vehicle using a #34 drill bit.
Step 4.
Using the provided screws, mount the bracket to the vehicle using mount shown in Figure 2.
Step 5.
Repeat the process for the opposite side running board.
Step 6.
Route the lights wiring as desired.
Note: Instructions are made using Driver’s Side as example. To Reproduce results, revisit each step for Passenger Side.
Installtion and Mounting Instructions:
Figure 1
Figure 2
