6
Fig. 7
Automatic spray guns Ecco 70AP
Fig. 5
The position of guide pin for Horizontal Pattern
Fig. 6
The position of guide pin for Vertical Pattern
Air caps
(See Fig. 5 and 6)
The air caps are tested and certified according to the SEAVA meth-
od. This gives a ”finger print” of the spray pattern on each air cap.
For further information please contact your supplier.
The retaining ring for the air cap shall only be tightened with hand force.
No tools are required. Especially important when a cap cleaner is used.
Fix 2 on the air cap, denotes that the air cap can be installed in ver-
tical or horizontal position, depending on the position of the pin in the
distribution ring (
See Fig. 5 and 6)
.
Fix 4 on the air cap, denotes that the air cap can be installed in ver-
tical or horizontal position, regardless off the position of the pin in the
distribution ring.
Air caps can be sent back for checking and comparity the
performance. For further interesting please contact your supplier.
65130 F257
65130 F258
7. Paint needle
8. Piston
9. Packing screw
22. Paint nozzle
23.
Air cap
19. Packing screw
20. Distribution ring
21. Purge insert
65130 F266
