Arrowstik Flash Pattern Selection
The CC Series Lightbar is designed to offer user selectable traffic directing and traffic warning flash patterns. Each of the ArrowStik® func
-
tions (LEFT, CENTER-OUT, RIGHT and FLASH) can be programmed individually for unique patterns and flash rates. This allows the greatest
flexibility when controlling the various Lightbar configurations available. A Lightbar may be wired as a 5, 6, 7 or 8 light head configuration. The
Lightbar will come from the factory with the Building Fast flash pattern as the default for LEFT, CENTER-OUT and RIGHT. The default pattern
for FLASH is Drivers Side Cut – Front, corner & alley.
When selecting a flash pattern for one of the four Arrowstik functions, apply power to the lightbar and the desired function wire (listed in Table
2). Briefly touch the Pattern Select wire (RED/BLK) to +power to cycle through the flash patterns shown in the table below. Ensure power
isn’t applied to any other function wire during flash pattern selection.
Flash patterns marked with an asterisk (*) can be selected in Fast, Medium or Slow flash rate.
Arrowsik Left, Center-Out &
Right Flash Patterns
Order Flash Pattern
1
Building*
2
Building, 3-Flash*
3
Traveling Ball, 3-Flash*
4
Build/Collapse*
TABLE 12
Arrowstik Flash Patterns
Order Flash Pattern
1
Drivers Side Cut - Front corner & alley
2
Drivers Side Cut - Rear corner & alley
3
Drivers Side Cut - Front outboard, corner alley
4
Standard Flash*
5
Quad Flash Standard
6
Simultaneous Flash*
7
Quad Flash Simultaneous
8
Even/Odd Flash*
9
Quad Flash Even/Odd
10
Left/Right Flash*
11
Quad Flash Left/Right
12
Travelling Ball Flash*
TABLE 13
To restore the Factory Default ArrowStik Flash Patterns, hold the BLK/RED and desired function wire to +power for ~four seconds.
Takedown, Work and Alley Light Flash Pattern Selection
When selecting a flash pattern for one of the Takedown/Work Light or Alley Light Modes, power-up the light bar and apply power to the
Takedown Flash Mode (BLK) or the Alley Flash Mode (BLU/WHT). Programming will not work if more than one function is selected. Touch
the Pattern Select wire (RED/BLK) to +power to cycle through the flash patterns shown in the table below.
Takedown, Work & Alley Light
Flash Patterns
Order Flash Pattern
1
Medium Single 115
FPM
2
Slow Single 60 FPM
3
Fast Double 115 FPM
4
Slow Double 60 FPM
5
Fast Six 80 FPM
6
Slow Six 60 FPM
7
Variable Rate - Single
8
NFPA Quad 75 FPM
9
Cycle Flash
10
Fast Quad 80 FPM
11
Slow Quad 60 FPM
12
Fast Single 375 FPM
TABLE 14
