6
9.
Automatic Learning of all phone numbers
The unit can be set to learn up to 1600 Normal Users automatically while the users call the unit to
activate the relay. In this mode the unit checks the caller’s ID (the mobile phone number) of each
incoming call and registers it automatically in the system’s memory and at the same time triggers the
relay according to the chosen setting.
To activate the Automatic Learning Send SMS:
9999automatic
To cancel the Automatic Learning Send SMS:
9999manual
The unit will reply by SMS accordingly:
Automatic Learning mode is ON
or
Automatic Learning mode is OFF
10.
How to check the number of users in the system
The system can be programmed with 1600 Normal Users and 400 Special Users
You can check the number of users in the system as follows:
Send SMS:
9999users
The unit will reply by SMS:
“There are XXXX normal users and XXX special users in the system”
11.
How to LOCK / UNLOCK the system
The unit can be LOCKED, so that none of users can use the system and activate the relay.
To
Lock
send SMS:
9999lock
To
Unlock
send SMS:
9999unlock
The unit will reply by SMS accordingly:
“The unit is LOCKED” or “The unit is UNLOCKED”
12.
HOLD COMMAND
The HOLD COMMAND enables you to overtake control of the system and keep the relay of the unit
active (ON) until cancellation command is received.
When the unit’s relay is in HOLD mode, the unit will not function to any other command until a
cancellation command is received.
When the HOLD COMMAND is active ON, the unit will send SMS to each user saying
“
Hold Command is Active
” each time the user will try to call and trigger the gate to open.
To activate the
Hold Command
send SMS as follows:
9999hold
The unit will reply by SMS:
Hold Command is ON.
To cancel the
Hold Command
send SMS as follows:
9999release
The unit will reply by SMS:
Hold Command is OFF.
