EC-520 User’s Manual
Important Safety Instruction
Be sure to have read the manual carefully before your operation. Neither our Corporation
nor its affiliates shall be liable to the purchaser of this product or third parties for
damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:
accident, misuse, or abuse of this product or unauthorized modifications, repairs, or
alterations to this product, or failure to strictly comply with our Corporation’s operating
and maintenance instructions.
z
Follow all warnings and instructions marked on the product.
z
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
z
Do not use this product near water.
z
Be sure to set this equipment on a firm, stable, horizontal surface. The product may
break or cause injury if it falls.
z
Slots and opening on the cabinet at the back or bottom are provided for ventilation. To
ensure reliable operation of the product and to protect it from overheating, do not block
or cover these openings. The openings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should not be placed in a
built-in installation unless proper ventilation is provided.
z
This product should never be placed near or over a radiator or heat origin, and should
avoid of direct sunshine.
z
Do not locate this product where the cord will be walked on. When the cord or the plug is
mangled, please stop using and get a new one replaced. Make sure the old one is far
away from the printer, so it can avoid someone who does not know the inside story
getting damaged.
z
Be sure to use the specified power source. Connection to an improper power source
may cause fire or shock.
z
Do not use in locations subject to high humidity or dust levels. Excessive humidity and
dust may cause equipment damage or fire.
z
Never push objects of any kind into this product though cabinet slots as they may touch
dangerous voltage dots or short out parts.
z
Don’t remove the printer’s out-cover and repair the printer. When needed, call or take it
to the professional.
z
If water or other liquid spills into this equipment, unplug the power cord immediately,
and then contact your dealer or a service center for advice.
z
To ensure safety, please unplug this product prior to leaving it unused for an extended
period. The wall outlet you plan to connect to should be nearby and unobstructed.
z
Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilt into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when the operating instructions are followed.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating a need for service.
Note: The contents of this manual may be changed without prior notice.
* All the parts of the printer can be recycled. When it is abandoned, we can callback it
freely. Please contact us when you abandon it.
- i -
